Recently tried printing "glass" again. This is SBS transparent. I pushed the temperature from 220°C all the way to 250°C. The more milky one was at lower temps, tried the 250°C as npub1yrlmnr0y2ch5ycn38j2navyduf5q6tqyd0led3p7xhwmzwcrlsaq558gpm (npub1yrl…8gpm) has suggested for TPU and SBS for flow previously, as well as multiple guides for "printing glass". It worked for flow as well as better bonding layers and allowed them to flow into each other. It almost results in a polarization effect.
The temperature difference has made a difference. But I also increased the EM from 0.96 to 1.025, 1.10 was too high, and created other problems, such as a rough texture. An interesting thing here is that look at the layer allignment. I used 0° for one and 90° for the other.
As with classic 3D printing, geometry and orientation make a difference.
The part is for a transparent drawer, of which the handle broke off. The drawer is transparent. Black, white, grey, etc, just didn't look attractive. So I tried printing "glass".
npub12atwfrq4rfv7fqara6gzsgrgj7k8ngewzl5nzs46agwyxzh0e25qxlme5y (npub12at…me5y) #3dprinting
Stark /
npub1du…mrdxt
2024-01-01 00:07:40
Author Public Key
npub1du3s0yz2jtnhzckdvatn0fdd07htywny8p6lwas93ekqlzxnyxaqumrdxtPublished at
2024-01-01 00:07:40Event JSON
{
"id": "96ee3d636466a1ecee9de29d05458eb8db595290c4dc75dc96a2c4938a396686",
"pubkey": "6f2307904a92e77162cd675737a5ad7faeb23a643875f776058e6c0f88d321ba",
"created_at": 1704067660,
"kind": 1,
"tags": [
[
"p",
"20ffb98de4562f4262713c953eb08de2680d2c046bff96c43e35ddb13b03fc3a",
"wss://relay.mostr.pub"
],
[
"p",
"5756e48c151a59e483a3ee9028206897ac79a32e17e93142baea1c430aefcaa8",
"wss://relay.mostr.pub"
],
[
"p",
"ea01c28d25fdebef270fb11977d88794eaa6e04210af4e9f0d45d2ca4df3e28e",
"wss://relay.mostr.pub"
],
[
"p",
"02a0f2cd76233181ace57dc1bcc8c69d14efd1b973613d49e6e28b2cb89aee30",
"wss://relay.mostr.pub"
],
[
"t",
"3dprinting"
],
[
"proxy",
"https://techhub.social/users/Stark9837/statuses/111677778193078029",
"activitypub"
]
],
"content": "Recently tried printing \"glass\" again. This is SBS transparent. I pushed the temperature from 220°C all the way to 250°C. The more milky one was at lower temps, tried the 250°C as nostr:npub1yrlmnr0y2ch5ycn38j2navyduf5q6tqyd0led3p7xhwmzwcrlsaq558gpm has suggested for TPU and SBS for flow previously, as well as multiple guides for \"printing glass\". It worked for flow as well as better bonding layers and allowed them to flow into each other. It almost results in a polarization effect.\n \nThe temperature difference has made a difference. But I also increased the EM from 0.96 to 1.025, 1.10 was too high, and created other problems, such as a rough texture. An interesting thing here is that look at the layer allignment. I used 0° for one and 90° for the other. \n \nAs with classic 3D printing, geometry and orientation make a difference.\n \nThe part is for a transparent drawer, of which the handle broke off. The drawer is transparent. Black, white, grey, etc, just didn't look attractive. So I tried printing \"glass\".\n\nnostr:npub12atwfrq4rfv7fqara6gzsgrgj7k8ngewzl5nzs46agwyxzh0e25qxlme5y #3dprinting",
"sig": "6bc4b63b7f67669544d40a97a8d48986ddff02c937b1e4705dd85f3a3058f09651add92d7094c03cfd336bf32c9f7a870efa20b61a22d65c579518cde4f04cb6"
}