To be clear, this is straight out of the nozzle & apart from the fact that it says 0.4 on the side, I've tried another, also .4 nozzle, same result.
What am I missing...?
#3Dprinting 3D Printing (npub1d4n…dptf)
JW Prince of CPH on Nostr: Uh, OK - I'm stumped... why in the name of Bonaparte's unmentionables are my .4 ...
Uh, OK - I'm stumped... why in the name of Bonaparte's unmentionables are my .4 nozzles extruding at .8 all of a sudden!? I just replaced the hotend & added a bimetal heat break & no physics I can wrap my head around should lead from either (or both) of those things to double extrusion thickness 🤯
To be clear, this is straight out of the nozzle & apart from the fact that it says 0.4 on the side, I've tried another, also .4 nozzle, same result.
What am I missing...?
#3Dprinting 3D Printing (npub1d4n…dptf)
To be clear, this is straight out of the nozzle & apart from the fact that it says 0.4 on the side, I've tried another, also .4 nozzle, same result.
What am I missing...?
#3Dprinting 3D Printing (npub1d4n…dptf)