TupambAdminOrg [2024.03] / is on Nostr

This is the admin profile of the tupambae.org server.

Friendica |Friendica 'Yellow Archangel' 2023.12 - 1542 PHP Version 8.1.2-1ubuntu2.14

VPS server | Ubuntu 22.04 LTS

4 Core CPU, 8 GB Ram with 300GB NVME Disk - unlimited traffic | hosted by @raroun 👍¿ẞ™®©π√°^•∆¶✓¡

Last Notes

2025-04-08 03:17:49

- reply

@nprofile…dzkq
castopod answer to specific castopod related php setting in .env (config file):
tupambae.org/display/e6f70137-…

2025-03-16 01:04:21

- reply

v.01
@nprofile…xmvk
#friendicaPHP-fpm Q&A @nprofile…3ljd
deadlink DIY standard procedures - best practiceOpen a minimalistic text editor of your choice (e.g. mousepad/kate) to store basic and important information of your interaction with the CLI (console).
Backup the commands and copy/paste notes of the basic results as well as information of your search and queries.
checking the existing settings before any modificationrootname@VPShosting:~# sudo php -v
rootname@VPShosting:~# sudo php --version
rootname@VPShosting:~# sudo php
rootname@VPShosting:~# sudo which php
rootname@VPShosting:~# sudo ls -l /usr/bin/
rootname@VPShosting:~# sudo ls -l /etc/alternatives/system up to date check
rootname@VPShosting:~# sudo apt get update
rootname@VPShosting:~# sudo apt get upgrade
eventually
rootname@VPShosting:~# sudo apt get dist-upgradeadding PHP-fpm PPA to the systemif you havent already added php-fpm PPA to your system
add PPA's as sources to the system
add the PHP-fpm PPA to the system
rootname@VPShosting:~# sudo install software-properties-common
rootname@VPShosting:~# sudo add-apt-repository ppa:ondrej/phpstandard instalation of specific php modules for friendica using PHP-fpmThis list is from the install tutorial in progress:
Install and/or move friendica 2023.05 to ubuntu 22.04 LTS VPS server
rootname@VPShosting:~# sudo sudo apt install php php-fpm libapache2-mod-php php-common php-gmp php-curl php-intl php-mbstring php-xmlrpc php-mysql php-gd php-imagick php-xml php-cli php-zip php-sqlite3
Changes in friendica over timephp specific mentions in changelog of the friendica github repo over timeVersion 2024.03 (2024-03-21)
Improved PHP 8.2 compatibility
[MrPetovan] Friendica Addons
advancedcontentfilter
Updated dependency for PHP8.2 compatibility
[MrPetovan]Version 2023.12 (2023-12-24)
Friendica Core
Raised minimal PHP version to 7.4
Version 2022.12 (2022-12-20)
Improved the PHP 8.1 compatibility
[MrPetovan]Version 2022.02 (2022-02-06)
Friendica Core
Bumped the minimal version of PHP to 7.3
Friendica Addons
securemail
Updated dependencies to enhance the PHP8 support
[MrPetovan]Version 2021.07 (2021-07-04)
Friendica Core
Enhanced the support of PHP8 [nupplaphil, MrPetovan]
Version 2021.04 (2021-04-26)
Friendica Core
Enhanced the PHP8 compatibility [annando, nupplaphil, realkinetix]
Version 2021.01 (2021-01-04)
Friendica Core
Enhanced PHP8 compatibility
[annando]Version 2018.09 (2018-09-23)
Friendica Core:
Enhancements to the PHP7.2 compatibility [annando, miqrogroove, MrPetovan]
Friendica Addons:
Directory:
Enhancements of the PHP7 compatibility
[MrPetovan]Version 2018.05 (2018-06-01)
Friendica Core:
Enhancements to the PHP7.2 compatibility [Alkarex, MrPetovan, Quix0r]
Fixed wrong version of a dependency preventing the usage of PHP 5.6
[MrPetovan]Version 3.5.4 (2017-10-16)
Friendica Core:
Update the DB handling for support of PHP 7.1
[annando]Version 3.5.2 (2017-06-06)
Friendica Core:
Improved php7 support
[annando]Version 3.5.1 (2017-03-12)
Friendica Core:
Work on PHP7 compatibility
[ddorian1]Version 3.3
System stuff
no more apc support due problems with PHP 5.5
Specific installation instruction for:
friendica 3.4.3friendica 3.4.3 and Addons:
Instalation Instructions Requirements:
Apache with mod-rewrite enabled and "Options All" so you can use a
local .htaccess file PHP 5.2+. The later the better. PHP 5.3 is required for communications
with the Diaspora network and improved security. PHP *command line* access with register_argc_argv set to true in the
php.ini file - (cli,) curl, gd (with at least jpeg support), mysql, mbstring, mcrypt,
and openssl extensions ?
- Mysql 5.x ?relevant changelog entries 3.4.3 to 3.6 - https://github.com/friendica/friendica/blob/3.4.3/CHANGELOG
Version 3.5.4 (2017-10-16)
Friendica Core:
Update the DB handling for support of PHP 7.1
[annando]Version 3.5.2 (2017-06-06)
Friendica Core:
Improved php7 support
[annando]Version 3.5.1 (2017-03-12)
Friendica Core:
Work on PHP7 compatibility
[ddorian1]Version 3.3
System stuff
no more apc support due problems with PHP 5.5friendica 2019.12Github tree 2019.12
Requirements
Apache with mod-rewrite enabled and "Options All" so you can use a local .htaccess file
PHP 7+ (PHP 7.1+ is recommended for performance and official support)
PHP command line access with register_argc_argv set to true in the php.ini file
Curl, GD, PDO, MySQLi, hash, xml, zip and OpenSSL extensions
The POSIX module of PHP needs to be activated (e.g. RHEL, CentOS have disabled it)
some form of email server or email gateway such that PHP mail() works
MySQL 5.6+ or an equivalent alternative for MySQL (MariaDB, Percona Server etc.)relevant changelog entries 2019.12https://github.com/friendica/friendica/blob/2019.12/CHANGELOG]Version 2018.09 (2018-09-23)Friendica Core:
Enhancements to the PHP7.2 compatibility [annando, miqrogroove, MrPetovan]2021.01 | apparently no changes to 2019.12Github tree 2021.01
Requirements
Apache with mod-rewrite enabled and "Options All" so you can use a local .htaccess file
PHP 7+ (PHP 7.1+ is recommended for performance and official support)
PHP command line access with register_argc_argv set to true in the php.ini file
Curl, GD, PDO, MySQLi, hash, xml, zip and OpenSSL extensions
The POSIX module of PHP needs to be activated (e.g. RHEL, CentOS have disabled it)
some form of email server or email gateway such that PHP mail() works
MySQL 5.6+ or an equivalent alternative for MySQL (MariaDB, Percona Server etc.)
PHP 7.1+
Curl, GD, PDO, MySQLi, hash, xml, zip and OpenSSL extensions
relevant changelog entries 2021.01https://github.com/friendica/friendica/blob/2021.01/CHANGELOG]Version 2021.01 (2021-01-04)
Friendica Core
Enhanced PHP8 compatibility [annando]2021.04 | apparently no changes to 2021.01Github tree 2021.04
Requirements
Apache with mod-rewrite enabled and "Options All" so you can use a local .htaccess file
PHP 7+ (PHP 7.1+ is recommended for performance and official support)
PHP command line access with register_argc_argv set to true in the php.ini file
Curl, GD, PDO, MySQLi, hash, xml, zip and OpenSSL extensions
The POSIX module of PHP needs to be activated (e.g. RHEL, CentOS have disabled it)
some form of email server or email gateway such that PHP mail() works
MySQL 5.6+ or an equivalent alternative for MySQL (MariaDB, Percona Server etc.)
relevant changelog entries 2021.04https://github.com/friendica/friendica/blob/2021.04/CHANGELOG
Version 2021.04 (2021-04-26)
Friendica Core
Enhanced the PHP8 compatibility [annando, nupplaphil, realkinetix]2023.05Github tree 2023.05
Requirements
Apache with mod-rewrite enabled and "Options All" so you can use a local .htaccess file
PHP 7.3+ (PHP8 is not fully supported yet)
PHP command line access with register_argc_argv set to true in the php.ini file
Curl, GD, GMP, PDO, mbstrings, MySQLi, hash, xml, zip and OpenSSL extensions
The POSIX module of PHP needs to be activated (e.g. RHEL, CentOS have disabled it)
Some form of email server or email gateway such that PHP mail() works. If you cannot set up your own email server, you can use the phpmailer addon and use a remote SMTP server.
relevant changelog entries 2023.05https://github.com/friendica/friendica/blob/2023.05/CHANGELOG
Version 2022.02 (2022-02-06)
Friendica Core
Bumped the minimal version of PHP to 7.3
Friendica Addons
securemail
Updated dependencies to enhance the PHP8 support
[MrPetovan]Version 2021.07 (2021-07-04)
Friendica Core
Enhanced the support of PHP8 [nupplaphil, MrPetovan]2024.12Github tree 2023.05
Requirements
Apache with mod_rewrite enabled and "AllowOverride All" so you can use a local .htaccess file
PHP 7.4+
PHP command line access with register_argc_argv set to true in the php.ini file
Curl, GD, GMP, PDO, mbstring, MySQLi, xml, zip, IntlChar, IDN and OpenSSL extensions
The POSIX module of PHP needs to be activated (e.g. RHEL, CentOS have disabled it)
Some form of email server or email gateway such that PHP mail() works. If you cannot set up your own email server, you can use the phpmailer addon and use a remote SMTP server.
MySQL with support of InnoDB and Barracuda (we suggest a MariaDB server as all development is done using these, but alternatives like MySQL or Percona Server etc. might work as well)relevant changelog entries 2024.12https://github.com/friendica/friendica/blob/2024.012/CHANGELOG
Version 2024.03 (2024-03-21)
Improved PHP 8.2 compatibility
[MrPetovan] Friendica Addons
advancedcontentfilter
Updated dependency for PHP8.2 compatibility
[MrPetovan]Version 2023.12 (2023-12-24)
Friendica Core
Raised minimal PHP version to 7.4
Version 2022.12 (2022-12-20)
Improved the PHP 8.1 compatibility [MrPetovan]
The following are adapted lists of modules for older versions of friendica so they can run in a PHP-fpm setup.
php-fpm version php8.1all avilabel modules:
php8.1 php8.1-cli php8.1-common php8.1-dev php8.1-fpm php8.1-cgi libphp8.1-embed php8.1-phpdbg php8.1-readline php8.1-curl php8.1-mysql php8.1-sqlite3 php8.1-pgsql php8.1-imap imagemagick php8.1-imagick php8.1-gd memcached php8.1-memcached php8.1-memcache php8.1-opcache php-apcu php-apcu-bc php8.1-apcu php8.1-igbinary php8.1-mcrypt php8.1-bcmath php8.1-zip php8.1-bz2 xml2 php8.1-xml php8.1-tidy php8.1-xsl php8.1-intl php8.1-mbstring php8.1-pspell php8.1-ldap php8.1-soap php8.1-xmlrpc php-pear pkg-php-tools shtool dh-php dh-make php-geoip libruby
libapache2-mod-php8.1 libapache2-mod-fcgid apache2-suexec-pristine libapache2-mod-pythonUse the following command to search available PHP 8 modules in the package repository.
sudo apt-cache search php8*
Adjustet modules list for a PHP8.1-fpm instalation for friendica 2023.05 to friendica 2024.12 using version php8.1 (as of writing):basic modules to work with and run properly php8.1-fpmlibapache2-mod-php -> to run PHP scripts on apache, necessary for -fpm?
libapache2-mod-fcgid -> unclear if necessary for -fpm
php8.1 -> standard PHP
php8.1-fpm -> standard PHP-spm module
php8.1-mysql -> Allows PHP to interact with MySQL databases
php8.1-cgi -> run PHP scripts without apache PHP module
php8.1-cli -> run PHP scripts from the command line
rootname@VPShosting:~# sudo apt install libapache2-mod-php8.1 php8.1 php8.1-fpm php8.1-cgi php8.1-cli php8.1-mysqlspecific additional modules to run friendica with php8.1-fpmphp8.1-common ->
php8.1-curl -> URL transfer in PHP applications
php8.1-gd -> image processing
php8.1-imagick ->
php8.1-intl ->
php8.1-mbstring -> support for UTF-8 text formats
php8.1-sqlite3 ->
php8.1-xml -> XML support
php8.1-xmlrpc ->
php8.1-zip -> ZIP file support
rootname@VPShosting:~# sudo apt install php8.1-common php8.1-curl php8.1-gd php8.1-intl php8.1-zip php8.1-xml php8.1-xmlrpc php8.1-imagick php8.1-mbstring php8.1-sqlite3some more optional basic modules for php8.1-fpm:php8.1-phpdbg ->
hp8.1-imap ->
imagemagick ->
php8.1-mcrypt ->
php8.1-json ->
rootname@VPShosting:~# sudo apt install php8.1-phpdbg php8.1-imap imagemagick php8.1-mcrypt php8.1-jsonactivate php8.1-fpmenable php8.1
restart the apache server to initialize the changes
rootname@VPShosting:~# sudo a2enconf php8.1-fpm]
rootname@VPShosting:~# sudo systemctl restart apache2
php7.Xy specific notesphp-imagick = [-imagick] is php-version specific present since php7.4-imagick.
before it's moste likely necessary to install imagemagick(?)
2019.12 mentions the module "hash" ?
OpenSSL extensions ?List of php7.Xy-fpm specific modules not mentioned in the install instructionsrootname@VPShosting:~# sudo apt install php7.2-fpmList of modules mentioned in the github and/or the friendica ubuntu server install instructionsrootname@VPShosting:~# sudo apt install libapache2-mod-php7.2 php7.2 php7.2-common php-gmp php7.2-intl php7.2-mbstring php-xmlrpc php7.2-gd php7.2-mysql php7.2-zip php7.2-curl php7.2-xml php7.2-cli php7.2-sqlite3List of php7.Xy-fpm modules not mentioned in the install instructions but present in newer versions of friendica (?)Adjustet modules list for a PHP-fpm instalation for earliest friendica versions running from php7.Xy forward or somehow already installed (/):
rootname@VPShosting:~# sudo apt install phpmyadmin imagemagick
very old friendica versions using php5.6modules list for a PHP-fpm instalation for earliest friendica versions running php5.6.
Notes php5.6-fpmThe following modules do not exist in php5.6 as specific version modul: php-imagick
Specific installtion instruction for friendica 3.4.3 and Addons
Instalation Instructions Requirements:
Apache with mod-rewrite enabled and "Options All" so you can use a
local .htaccess file PHP 5.2+. The later the better. PHP 5.3 is required for communications
with the Diaspora network and improved security. PHP *command line* access with register_argc_argv set to true in the
php.ini file - (cli,) curl, gd (with at least jpeg support), mysql, mbstring, mcrypt,
and openssl extensions ?
- Mysql 5.x ?complete list of php5.6-fpm modulesphp5.6 php5.6-common php5.6-gd php5.6-mysql php5.6-imap phpmyadmin php5.6-cli php5.6-cgi libapache2-mod-fcgid apache2-suexec-pristine php-pear mcrypt imagemagick libruby libapache2-mod-python php5.6-curl php5.6-intl php5.6-pspell php5.6-recode php5.6-sqlite3 php5.6-tidy php5.6-xmlrpc php5.6-xsl memcached php-memcache php-imagick php-gettext php5.6-zip php5.6-mbstring php5.6-opcache php5.6-json php5.6-ldap php5.6-soap php5.6-bz2 php5.6-bcmath php5.6-xml php5.6-dev php5.6-fpm php5.6-phpdbg php-apcu dh-php php5.6-readline pkg-php-tools shtool xml2list of modules extracted from the list above that don't have a php5.6 prefixphpmyadmin libapache2-mod-fcgid apache2-suexec-pristine php-pear mcrypt imagemagick libruby libapache2-mod-python memcached php-memcache php-imagick php-gettext php-apcu dh-php pkg-php-tools shtool xml2List of php5.6-fpm specific modules not mentioned in the install instructionsrootname@VPShosting:~# sudo apt install php5.6-fpmList of php5.6-fpm modules mentioned in the github and/or the friendica ubuntu server install instructionsrootname@VPShosting:~# sudo apt install php5.6-cli php5.6-curl php5.6-gd php5.6-mysql php5.6-mbstring mcryptList of php5.6-fpm modules not mentioned in the install instructions but present in newer versions of friendica (?)rootname@VPShosting:~# sudo apt install php5.6 php5.6-common php5.6-sqlite3 php5.6-imap php5.6-intl php5.6-xml php5.6-zip php5.6-json php5.6-xmlrpc
standard information of platform specific settings in phpX.Yz.ini of phpX.Yz-fpmchanges in platform specific settings in phpX.Yz.ini of phpX.Yz-fpm
standard information of platform specific settings in platform specific fileschanges in platform specific settings in platform specific filesstandard settings in configuration files of domains
check the existing settings after the modificationrootname@VPShosting:~# sudo php -v
rootname@VPShosting:~# sudo php --version
rootname@VPShosting:~# sudo php
rootname@VPShosting:~# sudo which php
rootname@VPShosting:~# sudo ls -l /usr/bin/
rootname@VPShosting:~# sudo ls -l /etc/alternatives/
deadlink

2025-03-14 05:13:34

- reply

To PHP, to PHP-fpm or both .. that's the question!
Trying to visualize the whole setup and questions regarding PHP to figure out what options are best.
Given the fact that more than one php version is installed, it is precise to tell the server what php version to use:
for the server in general
for the specific domain
Does update-alternatives fix this setting for the server in general when ever there is no specific option mentioned in the domain.com.conf file or does this setting over-ride/over-rule settings in domain.com.conf and/or local.config.php?
(it probably does not over-rule specific settings)
The friendica instalation help page states:
You can combine environment variables and options, but be aware that options are prioritized over environment variables.Friendica settings
This variables [The following variables(?)] wont be used at normal Friendica runtime. Instead, they get saved into config/local.config.php.
FRIENDICA_PHP_PATH The path of the PHP binary
Can different settings in different places like:
/etc/alternatives/
/etc/apache2/sites-enabled/domain.com.conf
/var/www/domainfolder/bin/console config
and/or
crontab -e
create conflicts, slow down the server, become kind a fall back option or even create vulnerabilities?
conflicts
maybe
slow down the server
probably
become kind a fall back option
perhaps
create vulnerabilities
most likely
Can there actually be no standard setting in place at all as default php?
(probably not)
Is it possible to not define the php version in domain.com.conf and instead define it in:
/var/www/domainfolder/config/local.config.php
as
'php_path' => '/usr/bin/php.8.2/fpm'
as the php handler and in the case of the cron job call/define:
/usr/bin/php.8.2/fpm
instead of
/usr/bin/php
for the /var/www/domainfolder/bin/worker.php to use?
https://tupambae.org/photo/116598947767d3aefdb8976520730129-0.png

2025-03-04 01:53:49

v.01
#friendica Q&A @nprofile…3ljd
How does the setting:
'php_path' =>, definable in the /config/local.config.php or by the console via /bin/console config work exactly?
The setting 'php_path' => '/usr/bin/php', that actually also shows up in the crontab -e file doesn't exist as an existing folder structure and/or file, at least on this standard ubuntu server installation, but was the original setting of this instance when we ported it from a friendica beta hosting service over here to a single IP VPS server with a single domain. And till now with that setting this instance ran quite well.
Where does /usr/bin/php actually point to, by whom is ist accessed (www-data?) and is there a way to change the reference it points to (if it is actually a reference inside friendica)?
On this server, in the case of the installed friendica versions 2024.xx we set this to:
'php_path' => '/etc/php/8.1/fpm/' and for now the display in the admin panel looks quite right:
PHP version 8.1.31 php.ini /**/8.1/fpm/php.ini
reasons for this "help to understand" request
This server is being setup to host different sub/domains, including different and older friendica instances (3.4.3/2019.12/2021.01/2021.04). The idea is at least to be able eventually to evolve them step by step to the actual stable or old stable versions of friendica. To achieve that this tutorial was used to be able to manage different php versions on the same VPS. The references for the php versions were taken from this github page.
There for the way the php version used for the different friendica versions is crucial to make things work in the first place.

2025-03-04 00:53:14

- reply

@nprofile…dzkq
How can I visite the helpers page as a logged in contact?
The first link in a reshared post of the (helpers) forum page redirects you to the forum page itself. Your profile name is shown in the drop down profile menue. The search bar is present but apparently a word search isn't available.
See screens for details.
The search tool and it's availablility probably is adjustable in the back end by @nprofile…y6au but most likely might have serious effects on the server load or can expose the server to load by bots.
https://tupambae.org/photo/159740057367c64ca43b635236461030-0.png
https://tupambae.org/photo/313123444167c64cb61e126092124722-0.png
https://tupambae.org/photo/447630397167c64cc337247796964173-0.png

2025-03-03 07:05:37

Problems with new friendica instance.
And actually the post to the helpers forum didn't show up:
Conversation Not Found
Unfortunately, the requested conversation isn't available to you.
Possible reasons include:
The top-level post isn't visible.
The top-level post was deleted.
This node has blocked the top-level author or the author of the shared post.
You have ignored or blocked the top-level author or the author of the shared post.
You have ignored the top-level author's server or the shared post author's server.
tupambae.com/display/ccf09959-…

2025-02-26 22:57:38

This help request is somehow solved. There were serious errores in different /etc/apache2/sites-available/defaultANDdomain.conf files introduced by hand and unchecked copy/paste practices.
Still having some troubles to get this work but at least there is some progress for now.
original halp requestHi there.
Trying right now to install a new friendica instance on another domain [tupambae.com] alongside this installation [tupambae.org] here.
This ubuntu 2022.04lts was installed initially as a single instance VPS with the following tutorial (in progress):
tupambae.org /display/0ac89072-9365-5d9d-8485-599077309156
The following changes were made to transform this VPS into a domain name-based single IP virtual hosting:
tupambae.org/display/0ac89072-…
This installation process right now is documented in this post:
tupambae.org/display/0ac89072-…
This intent got stuck after executing the git pull and bin/composer.phar install --no-dev step.
A in a first visit of the domain, instead of the system requirement check list a simple list of the files and folder of the "html" directory showed up. Than the server "broke down" and both domains, the new one and this one here gave just black pages, stating that the sites weren't reachable at all.
The console printed about the apache server the following:
apache error messagesroot@VPShosting:/var/www# systemctl restart apache2
Job for apache2.service failed because the control process exited with error code.
See "systemctl status apache2.service" and "journalctl -xeu apache2.service" for details.
--
root@VPShosting:/var/www# systemctl status apache2
× apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2025-02-26 14:20:25 UTC; 1min 18s ago
Docs: httpd.apache.org/docs/2.4/
Process: 38181 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
CPU: 20ms
Feb 26 14:20:25 tupambae.org systemd[1]: Starting The Apache HTTP Server...
Feb 26 14:20:25 tupambae.org apachectl[38184]: apache2: Syntax error on line 225 of /etc/apache2/apache2.conf: Syntax error on line 20 of /etc/apache2/sites-e>
Feb 26 14:20:25 tupambae.org apachectl[38181]: Action 'start' failed.
Feb 26 14:20:25 tupambae.org apachectl[38181]: The Apache error log may have more information.
Feb 26 14:20:25 tupambae.org systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
Feb 26 14:20:25 tupambae.org systemd[1]: apache2.service: Failed with result 'exit-code'.
Feb 26 14:20:25 tupambae.org systemd[1]: Failed to start The Apache HTTP Server.
To get this instance here running again the new domain was deactivated by:
sudo a2dissite newdomain.com
and restarting apache by:
systemctl restart apache2
Any idea what could be the problem or where to search for resolving this?

2025-02-23 16:13:19

- reply

@nprofile…tys9 @nprofile…dzkq @nprofile…k9z3 @nprofile…xugr
Database structure update 1557 was successfully applied.
👍
https://tupambae.org/photo/178048197967bb48f28f695495440444-0.png

2025-02-20 22:37:43

- reply

@nprofile…tys9 @nprofile…k9z3 @nprofile…xugr error notice: DefinitionCache/Serializer not writable
Serializer.php php line 2982025-02-20T22:15:46Z WARNING app E_USER_WARNING: Directory /var/www/html/vendor/ezyang/htmlpurifier/library/HTMLPurifier/DefinitionCache/Serializer not writable.
Directory /var/www/html/vendor/ezyang/htmlpurifier/library/HTMLPurifier/DefinitionCache/Serializer not writable.
file
/var/www/html/vendor/ezyang/htmlpurifier/library/HTMLPurifier/DefinitionCache/Serializer.php
php line 298
error 512

2025-02-20 21:49:02

- reply

@nprofile…tys9 @nprofile…k9z3 @nprofile…xugr Database structure update 1542 was successfully applied.
👍
https://tupambae.org/photo/171316631867b7a31d8acd5693610576-0.png