Bill Cypher on Nostr: First step, the panel. Took a torque screwdriver through the panel tightening every ...

First step, the panel. Took a torque screwdriver through the panel tightening every ground and neutral with a wire on it.

I know you think you have a calibrated arm, YOU DO NOT. It is a wonder this is my only problem. I'm going to change shoes and do the hot wires later after what I just saw. I probably should have worn my insulated boots for the entire panel now that I think about it.

All tight now including confirming the specific ground for the faulty circuit. Tested, still voltage on ground at the outlet where I found the problem.

I guess that means I'll be opening up outlets and light fixtures. <s>Yay</s>

quoting
nevent1q…9hml

Breaker off. I spy 3 outlets and 2 overhead lights that aren't working.

That isn't as much stuff as I thought it would be. Now to go 1 by 1 looking for the issue.

nevent1q…5vu3