adafruit on Nostr: () and realized they're just using the same 1.14" TFTs we stock already (), so why ...
(
http://www.unitedcreation.co/marvel-tubes/) and realized they're just using the same 1.14" TFTs we stock already (
https://www.adafruit.com/product/4383), so why not re-spin the breakout into a skinny right-angle-mount version? Instead of card edge, we have 2x7 right angle headers - both rows are the same contact, but this way, we get more mechanical stability. We kept the level shifting to work with 3.3V or 5V microcontrollers but dropped the micro SD card.
Published at
2024-11-19 12:55:48Event JSON
{
"id": "95be6add108f0d50db0df7f9be3d9633ed7e001133c79f2d915fed88f1358632",
"pubkey": "c164633a8802f15a960409c6a2889f36b63295baf91bdad19dfdaf1db4cef46a",
"created_at": 1732020948,
"kind": 1,
"tags": [
[
"e",
"6ce2c070b2683cd8ea9b4bd7fc17caa972049a67bfd88ed28d57adfeba8976e9",
"wss://relay.mostr.pub",
"reply"
],
[
"proxy",
"https://mastodon.cloud/users/adafruit/statuses/113509724910514438",
"activitypub"
]
],
"content": "(http://www.unitedcreation.co/marvel-tubes/) and realized they're just using the same 1.14\" TFTs we stock already (https://www.adafruit.com/product/4383), so why not re-spin the breakout into a skinny right-angle-mount version? Instead of card edge, we have 2x7 right angle headers - both rows are the same contact, but this way, we get more mechanical stability. We kept the level shifting to work with 3.3V or 5V microcontrollers but dropped the micro SD card.",
"sig": "1cd419fa9ba2698233e84c1e63db4b6cb41deb7d9d0967e0c59c125fd0cea8a1e2b74fc6c69489a730780ad10e260ca8a502691638dc9cfe99c3a1a9ddb38037"
}
