📅 Original date posted:2012-02-24
📝 Original message:Just copied your bitcoin.conf file to my system and the server connects just fine to RPC on 10332
and I get using curl:
MacGronager:bin gronager$ curl --data-binary '{"jsonrpc": "2.0", "id":"curltest", "method": "getblockcount", "params": [] }' -H 'Content-Type: application/json' http://127.0.0.1:10332
{"jsonrpc":"2.0","result":168299,"error":null,"id":"curltest"}
Didn't do a retest on linux, but I am quite certain that it works there well as I had it running for weeks on port 9332 on amazon.
However, the "port" parameter will not work
> ...
> bind(12, {sa_family=AF_INET, sin_port=htons(8333), sin_addr=inet_addr("0.0.0.0")}, 16) = -1 EADDRINUSE (Address already in use)
> ...
and as you can see it connects to 8333 - that for the bitcoin protocol.
I havn't implemented "port" (have a look at the possible options in bitcoind.cpp). It was not on the official help list in bitcoind 0.4.0 (see init.cpp or do a bitcoin/bitcoind -help). But, I can implement it over the weekend if your need it.
I also tested the bitcoind --rpcport=10332 and it worked too using the commandline - both running as server and client.
/M
> I already tried:
>
> /usr/local/bin/bitcoind --rpcport 10332
> /usr/local/bin/bitcoind --rpcport=10332
>
> Without success...
>
> Thanks again!
> Thiago
>
> 2012/2/24 Michael Grønager <gronager at ceptacle.com>
> Hi Thiago,
>
> Forgot to comment on the two latter:
>
> > $ bitcoind getaccountaddress ""
> > HTTP error code: 401
> > Error: couldn't parse reply from server
> >
> > $ bitcoind listaccounts
> > HTTP error code: 401
> > Error: couldn't parse reply from server
> >
>
> 401 = permission denied - you need to setup username / password either on the commandline or in the bicoin.conf file to access those commands...
>
> See in the bitcoind.cpp file for commands that you can use with and without auth...
>
> Those that contains an "auth" requires auth:
>
> server.registerMethod(method_ptr(new GetBalance(wallet)), auth);
>
> As opposed to:
>
> server.registerMethod(method_ptr(new GetInfo(node)));
>
> auth is defined by:
>
> Auth auth(rpc_user, rpc_pass); // if rpc_user and rpc_pass are not set, all authenticated methods becomes disallowed.
>
> so you just experience the case explained in the comment ;) I admit that the output could be more readable, though!
>
> /M
>
>
> >
> > Any tips?! lol
> >
> > Thanks!
> > Thiago
> >
> > 2012/2/23 Martinx - ジェームズ <thiagocmartinsc at gmail.com>
> > AWESOME!!!
> >
> > I can compile libcoin at my Ubuntu 11.10... I just need to install:
> >
> > sudo aptitude install libboost1.46-all-dev
> >
> > ...alongside with another already installed dependencies, and now it works!!
> >
> > Thank you!
> > Thiago
> >
> > 2012/2/23 Michael Grønager <gronager at ceptacle.com>
> > Hi Martinx,
> >
> > Another note:
> >
> > boost 1.42 and openssl 1.0 has a conflict (you will see it when you try to compile coinHTTP with that specific combination: sslv2 has been removed from openssl, but boost still references it.)
> >
> > You should do a :
> >
> > sudo apt-get upgrade libboost-dev-all
> >
> > to get the 1.46.1 library
> >
> > /M
> >
> >
> > On 23/02/2012, at 18:31, Martinx - ジェームズ wrote:
> >
> >> Hi Michael!
> >>
> >> Thank you for libcoin! It is a awesome evolution for Bitcoin and for the CryptoCurrencies as a hole... Thanks!!!
> >>
> >> Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this machine, I have compiled and running Bitcoin (from sources), Namecoin, Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to compile libcoin, I got:
> >>
> >> ----
> >> user at desk:~/libcoin$ ./configure
> >> -- The C compiler identification is GNU
> >> -- The CXX compiler identification is GNU
> >> -- Check for working C compiler: /usr/bin/gcc
> >> -- Check for working C compiler: /usr/bin/gcc -- works
> >> -- Detecting C compiler ABI info
> >> -- Detecting C compiler ABI info - done
> >> -- Check for working CXX compiler: /usr/bin/c++
> >> -- Check for working CXX compiler: /usr/bin/c++ -- works
> >> -- Detecting CXX compiler ABI info
> >> -- Detecting CXX compiler ABI info - done
> >> -- Looking for include files CMAKE_HAVE_PTHREAD_H
> >> -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
> >> -- Looking for pthread_create in pthreads
> >> -- Looking for pthread_create in pthreads - not found
> >> -- Looking for pthread_create in pthread
> >> -- Looking for pthread_create in pthread - found
> >> -- Found Threads: TRUE
> >> -- Looking for XOpenDisplay in /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
> >> -- Looking for XOpenDisplay in /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
> >> -- Looking for gethostbyname
> >> -- Looking for gethostbyname - found
> >> -- Looking for connect
> >> -- Looking for connect - found
> >> -- Looking for remove
> >> -- Looking for remove - found
> >> -- Looking for shmat
> >> -- Looking for shmat - found
> >> -- Looking for IceConnectionNumber in ICE
> >> -- Looking for IceConnectionNumber in ICE - found
> >> -- Found X11: /usr/lib/i386-linux-gnu/libX11.so
> >> -- Boost version: 1.42.0
> >> -- Found the following Boost libraries:
> >> -- date_time
> >> -- regex
> >> -- filesystem
> >> -- system
> >> -- program_options
> >> -- thread
> >> -- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so
> >> -- Looking for Q_WS_X11
> >> -- Looking for Q_WS_X11 - found
> >> -- Looking for Q_WS_WIN
> >> -- Looking for Q_WS_WIN - not found.
> >> -- Looking for Q_WS_QWS
> >> -- Looking for Q_WS_QWS - not found.
> >> -- Looking for Q_WS_MAC
> >> -- Looking for Q_WS_MAC - not found.
> >> -- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
> >> -- Found wxWidgets: TRUE
> >>
> >> The build system is configured to install libraries to /usr/local/lib
> >> Your applications may not be able to find your installed libraries unless you:
> >> set your LD_LIBRARY_PATH (user specific) or
> >> update your ld.so configuration (system wide)
> >> You have an ld.so.conf.d directory on your system, so if you wish to ensure that
> >> applications find the installed libcoin libraries, system wide, you could install an
> >> libcoin specific ld.so configuration with:
> >> sudo make install_ld_conf
> >>
> >> -- Configuring done
> >> -- Generating done
> >> -- Build files have been written to: /home/user/libcoin
> >> ----
> >>
> >> Now I tried make, without success:
> >>
> >> ----
> >> .....
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xf): undefined reference to `BN_init'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x1e): undefined reference to `BN_copy'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x38): undefined reference to `BN_set_negative'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0x4f): undefined reference to `BN_clear_free'
> >> Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const&)]+0xd3): undefined reference to `BN_clear_free'
> >> ../../lib/libcoin.a(Script.o): In function `operator<<(CBigNum const&, unsigned int)':
> >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned int)]+0x16): undefined reference to `BN_init'
> >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned int)]+0x2c): undefined reference to `BN_lshift'
> >> Script.cpp:(.text._ZlsRK7CBigNumj[operator<<(CBigNum const&, unsigned int)]+0xad): undefined reference to `BN_clear_free'
> >> ../../lib/libcoin.a(Script.o): In function `operator>>(CBigNum const&, unsigned int)':
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned int)]+0xf): undefined reference to `BN_init'
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned int)]+0x1e): undefined reference to `BN_copy'
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned int)]+0x47): undefined reference to `BN_clear_free'
> >> Script.cpp:(.text._ZrsRK7CBigNumj[operator>>(CBigNum const&, unsigned int)]+0xcb): undefined reference to `BN_clear_free'
> >> ../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum const&, CBigNum const&)':
> >> Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const&, CBigNum const&)]+0x14): undefined reference to `BN_cmp'
> >> ../../lib/libcoin.a(Script.o): In function `operator>(CBigNum const&, CBigNum const&)':
> >> Script.cpp:(.text._ZgtRK7CBigNumS1_[operator>(CBigNum const&, CBigNum const&)]+0x14): undefined reference to `BN_cmp'
> >> ../../lib/libcoin.a(Script.o): In function `uint256 Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > > >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > >)':
> >> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256 Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > > >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > >)]+0x6d): undefined reference to `SHA256'
> >> Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256 Hash<__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > > >(__gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > >, __gnu_cxx::__normal_iterator<unsigned char*, std::vector<unsigned char, std::allocator<unsigned char> > >)]+0xb8): undefined reference to `SHA256'
> >> collect2: ld returned 1 exit status
> >> make[2]: *** [bin/bitcoind] Error 1
> >> make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all] Error 2
> >> make: *** [all] Error 2
> >> -----
> >>
> >> What can I do?!
> >>
> >> Best,
> >> Thiago
> >>
> >>
> >> On 1 February 2012 12:18, Michael Grønager <gronager at ceptacle.com> wrote:
> >> Dear Bitcoiners,
> >>
> >> libcoin is now in a state ready for its first release, which I would like to share with you!
> >>
> >> === libcoin is a crypto currency library based on the bitcoin/bitcoin "Satoshi" client. ===
> >>
> >> Copenhagen, Denmark - 1st February 2012 Ceptacle announces the release of the first version of the crypto currency library "libcoin" based on the bitcoin/bitcoin "Satoshi" client.
> >>
> >> libcoin also maintains a version of bitcoind that is a 100% compatible drop-in replacement of the bitcoin/bitcoind client: You can use it on the same computer on the same files and you can call it with the same scripts. And you can easily extend it without touching the basic bitcoin source files.
> >>
> >> The libcoin/bitcoind client downloads the entire block chain 3.5 times faster than the bitcoin/bitcoind client. This is less than 90 minutes on a modern laptop!
> >>
> >> In libcoin, the Satoshi client code has been completely refactored, properly encapsulating classes, removing all globals, moving from threads and mutexes to a pure asynchronous approach. Functionalities have been divided into logical units and libraries, minimizing dependencies for e.g. thin clients.
> >>
> >> libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin, litecoin, ...) specific settings are maintained from a single class (Chain) and hence experiments with chain settings, mining, security and digital currencies for research and educational purposes are easily accessible. See the ponzicoin example for how you define your own chain.
> >>
> >> The build system of libcoin is based on CMake and supports builds of static and dynamic libraries on Linux, Mac OS X, and Windows.
> >>
> >> The libcoin license is LGPL v. 3. This mean that you can use it in open source as well as in commercial projects, but improvements should go back into the libcoin library.
> >>
> >> ======
> >>
> >> Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki
> >>
> >> Join libcoin on twitter: http://twitter.com/libcoin
> >>
> >> Download "libcoin Satoshi release": http://github.com/ceptacle/libcoin/zipball/v0.4.0.1
> >>
> >> Best regards,
> >>
> >> Michael Gronager, PhD
> >> Director, Ceptacle
> >> Jens Juels Gade 33
> >> 2100 Copenhagen E
> >> Mobile: +45 31 45 14 01
> >> E-mail: gronager at ceptacle.com
> >> Web: http://www.ceptacle.com/
> >>
> >>
> >> ------------------------------------------------------------------------------
> >> Keep Your Developer Skills Current with LearnDevNow!
> >> The most comprehensive online learning library for Microsoft developers
> >> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
> >> Metro Style Apps, more. Free future releases when you subscribe now!
> >> http://p.sf.net/sfu/learndevnow-d2d
> >> _______________________________________________
> >> Bitcoin-development mailing list
> >> Bitcoin-development at lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/bitcoin-development
> >>
> >
> > Michael Gronager, PhD
> > Director, Ceptacle
> > Jens Juels Gade 33
> > 2100 Copenhagen E
> > Mobile: +45 31 45 14 01
> > E-mail: gronager at ceptacle.com
> > Web: http://www.ceptacle.com/
> >
> >
> >
>
>
Michael Gronager, PhD
Director, Ceptacle
Jens Juels Gade 33
2100 Copenhagen E
Mobile: +45 31 45 14 01
E-mail: gronager at ceptacle.com
Web: http://www.ceptacle.com/
Michael Grønager [ARCHIVE] /
npub15f…xlq6h
2023-06-07 03:04:35
in reply to nevent1q…4qne
Author Public Key
npub15fmnxm546tg2sv0l7elusrvqsgezdzdg3m0flpml5fr2qf3f5slskxlq6hPublished at
2023-06-07 03:04:35Event JSON
{
"id": "52180d37913e9dda764ec06de70fc2ec18c3e24d7e786cd3a214c1e2bb1367e1",
"pubkey": "a277336e95d2d0a831fff67fc80d8082322689a88ede9f877fa246a02629a43f",
"created_at": 1686107075,
"kind": 1,
"tags": [
[
"e",
"8c8f8e5ac71e66999253086c48157eaa0ddb50daf23c9cafc1b7979613f23b3c",
"",
"root"
],
[
"e",
"61cd079a0bb86131c2edfec15407112a726d5c911debc68efcf284bae6636afc",
"",
"reply"
],
[
"p",
"e09bd68efb1b69e9ae51fab9fe2f2ebbe578568b74f47e8c84e3a94662b50607"
]
],
"content": "📅 Original date posted:2012-02-24\n📝 Original message:Just copied your bitcoin.conf file to my system and the server connects just fine to RPC on 10332\nand I get using curl:\n\nMacGronager:bin gronager$ curl --data-binary '{\"jsonrpc\": \"2.0\", \"id\":\"curltest\", \"method\": \"getblockcount\", \"params\": [] }' -H 'Content-Type: application/json' http://127.0.0.1:10332\n{\"jsonrpc\":\"2.0\",\"result\":168299,\"error\":null,\"id\":\"curltest\"}\n\nDidn't do a retest on linux, but I am quite certain that it works there well as I had it running for weeks on port 9332 on amazon.\n\nHowever, the \"port\" parameter will not work\n\n\u003e ...\n\u003e bind(12, {sa_family=AF_INET, sin_port=htons(8333), sin_addr=inet_addr(\"0.0.0.0\")}, 16) = -1 EADDRINUSE (Address already in use)\n\u003e ...\n\nand as you can see it connects to 8333 - that for the bitcoin protocol.\n\nI havn't implemented \"port\" (have a look at the possible options in bitcoind.cpp). It was not on the official help list in bitcoind 0.4.0 (see init.cpp or do a bitcoin/bitcoind -help). But, I can implement it over the weekend if your need it.\n\nI also tested the bitcoind --rpcport=10332 and it worked too using the commandline - both running as server and client.\n\n/M\n\n\n\u003e I already tried:\n\u003e \n\u003e /usr/local/bin/bitcoind --rpcport 10332\n\u003e /usr/local/bin/bitcoind --rpcport=10332\n\u003e \n\u003e Without success...\n\u003e \n\u003e Thanks again!\n\u003e Thiago\n\u003e \n\u003e 2012/2/24 Michael Grønager \u003cgronager at ceptacle.com\u003e\n\u003e Hi Thiago,\n\u003e \n\u003e Forgot to comment on the two latter:\n\u003e \n\u003e \u003e $ bitcoind getaccountaddress \"\"\n\u003e \u003e HTTP error code: 401\n\u003e \u003e Error: couldn't parse reply from server\n\u003e \u003e\n\u003e \u003e $ bitcoind listaccounts\n\u003e \u003e HTTP error code: 401\n\u003e \u003e Error: couldn't parse reply from server\n\u003e \u003e\n\u003e \n\u003e 401 = permission denied - you need to setup username / password either on the commandline or in the bicoin.conf file to access those commands...\n\u003e \n\u003e See in the bitcoind.cpp file for commands that you can use with and without auth...\n\u003e \n\u003e Those that contains an \"auth\" requires auth:\n\u003e \n\u003e server.registerMethod(method_ptr(new GetBalance(wallet)), auth);\n\u003e \n\u003e As opposed to:\n\u003e \n\u003e server.registerMethod(method_ptr(new GetInfo(node)));\n\u003e \n\u003e auth is defined by:\n\u003e \n\u003e Auth auth(rpc_user, rpc_pass); // if rpc_user and rpc_pass are not set, all authenticated methods becomes disallowed.\n\u003e \n\u003e so you just experience the case explained in the comment ;) I admit that the output could be more readable, though!\n\u003e \n\u003e /M\n\u003e \n\u003e \n\u003e \u003e\n\u003e \u003e Any tips?! lol\n\u003e \u003e\n\u003e \u003e Thanks!\n\u003e \u003e Thiago\n\u003e \u003e\n\u003e \u003e 2012/2/23 Martinx - ジェームズ \u003cthiagocmartinsc at gmail.com\u003e\n\u003e \u003e AWESOME!!!\n\u003e \u003e\n\u003e \u003e I can compile libcoin at my Ubuntu 11.10... I just need to install:\n\u003e \u003e\n\u003e \u003e sudo aptitude install libboost1.46-all-dev\n\u003e \u003e\n\u003e \u003e ...alongside with another already installed dependencies, and now it works!!\n\u003e \u003e\n\u003e \u003e Thank you!\n\u003e \u003e Thiago\n\u003e \u003e\n\u003e \u003e 2012/2/23 Michael Grønager \u003cgronager at ceptacle.com\u003e\n\u003e \u003e Hi Martinx,\n\u003e \u003e\n\u003e \u003e Another note:\n\u003e \u003e\n\u003e \u003e boost 1.42 and openssl 1.0 has a conflict (you will see it when you try to compile coinHTTP with that specific combination: sslv2 has been removed from openssl, but boost still references it.)\n\u003e \u003e\n\u003e \u003e You should do a :\n\u003e \u003e\n\u003e \u003e sudo apt-get upgrade libboost-dev-all\n\u003e \u003e\n\u003e \u003e to get the 1.46.1 library\n\u003e \u003e\n\u003e \u003e /M\n\u003e \u003e\n\u003e \u003e\n\u003e \u003e On 23/02/2012, at 18:31, Martinx - ジェームズ wrote:\n\u003e \u003e\n\u003e \u003e\u003e Hi Michael!\n\u003e \u003e\u003e\n\u003e \u003e\u003e Thank you for libcoin! It is a awesome evolution for Bitcoin and for the CryptoCurrencies as a hole... Thanks!!!\n\u003e \u003e\u003e\n\u003e \u003e\u003e Anyway, I am unable to compile libcoin under my Ubuntu 11.04. At this machine, I have compiled and running Bitcoin (from sources), Namecoin, Devcoin, Litecoin, IXcoin and I0coin, all from sources but, when I try to compile libcoin, I got:\n\u003e \u003e\u003e\n\u003e \u003e\u003e ----\n\u003e \u003e\u003e user at desk:~/libcoin$ ./configure\n\u003e \u003e\u003e -- The C compiler identification is GNU\n\u003e \u003e\u003e -- The CXX compiler identification is GNU\n\u003e \u003e\u003e -- Check for working C compiler: /usr/bin/gcc\n\u003e \u003e\u003e -- Check for working C compiler: /usr/bin/gcc -- works\n\u003e \u003e\u003e -- Detecting C compiler ABI info\n\u003e \u003e\u003e -- Detecting C compiler ABI info - done\n\u003e \u003e\u003e -- Check for working CXX compiler: /usr/bin/c++\n\u003e \u003e\u003e -- Check for working CXX compiler: /usr/bin/c++ -- works\n\u003e \u003e\u003e -- Detecting CXX compiler ABI info\n\u003e \u003e\u003e -- Detecting CXX compiler ABI info - done\n\u003e \u003e\u003e -- Looking for include files CMAKE_HAVE_PTHREAD_H\n\u003e \u003e\u003e -- Looking for include files CMAKE_HAVE_PTHREAD_H - found\n\u003e \u003e\u003e -- Looking for pthread_create in pthreads\n\u003e \u003e\u003e -- Looking for pthread_create in pthreads - not found\n\u003e \u003e\u003e -- Looking for pthread_create in pthread\n\u003e \u003e\u003e -- Looking for pthread_create in pthread - found\n\u003e \u003e\u003e -- Found Threads: TRUE\n\u003e \u003e\u003e -- Looking for XOpenDisplay in /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so\n\u003e \u003e\u003e -- Looking for XOpenDisplay in /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found\n\u003e \u003e\u003e -- Looking for gethostbyname\n\u003e \u003e\u003e -- Looking for gethostbyname - found\n\u003e \u003e\u003e -- Looking for connect\n\u003e \u003e\u003e -- Looking for connect - found\n\u003e \u003e\u003e -- Looking for remove\n\u003e \u003e\u003e -- Looking for remove - found\n\u003e \u003e\u003e -- Looking for shmat\n\u003e \u003e\u003e -- Looking for shmat - found\n\u003e \u003e\u003e -- Looking for IceConnectionNumber in ICE\n\u003e \u003e\u003e -- Looking for IceConnectionNumber in ICE - found\n\u003e \u003e\u003e -- Found X11: /usr/lib/i386-linux-gnu/libX11.so\n\u003e \u003e\u003e -- Boost version: 1.42.0\n\u003e \u003e\u003e -- Found the following Boost libraries:\n\u003e \u003e\u003e -- date_time\n\u003e \u003e\u003e -- regex\n\u003e \u003e\u003e -- filesystem\n\u003e \u003e\u003e -- system\n\u003e \u003e\u003e -- program_options\n\u003e \u003e\u003e -- thread\n\u003e \u003e\u003e -- Found OpenSSL: /usr/lib/libssl.so;/usr/lib/libcrypto.so\n\u003e \u003e\u003e -- Looking for Q_WS_X11\n\u003e \u003e\u003e -- Looking for Q_WS_X11 - found\n\u003e \u003e\u003e -- Looking for Q_WS_WIN\n\u003e \u003e\u003e -- Looking for Q_WS_WIN - not found.\n\u003e \u003e\u003e -- Looking for Q_WS_QWS\n\u003e \u003e\u003e -- Looking for Q_WS_QWS - not found.\n\u003e \u003e\u003e -- Looking for Q_WS_MAC\n\u003e \u003e\u003e -- Looking for Q_WS_MAC - not found.\n\u003e \u003e\u003e -- Found Qt-Version 4.7.2 (using /usr/bin/qmake)\n\u003e \u003e\u003e -- Found wxWidgets: TRUE\n\u003e \u003e\u003e\n\u003e \u003e\u003e The build system is configured to install libraries to /usr/local/lib\n\u003e \u003e\u003e Your applications may not be able to find your installed libraries unless you:\n\u003e \u003e\u003e set your LD_LIBRARY_PATH (user specific) or\n\u003e \u003e\u003e update your ld.so configuration (system wide)\n\u003e \u003e\u003e You have an ld.so.conf.d directory on your system, so if you wish to ensure that\n\u003e \u003e\u003e applications find the installed libcoin libraries, system wide, you could install an\n\u003e \u003e\u003e libcoin specific ld.so configuration with:\n\u003e \u003e\u003e sudo make install_ld_conf\n\u003e \u003e\u003e\n\u003e \u003e\u003e -- Configuring done\n\u003e \u003e\u003e -- Generating done\n\u003e \u003e\u003e -- Build files have been written to: /home/user/libcoin\n\u003e \u003e\u003e ----\n\u003e \u003e\u003e\n\u003e \u003e\u003e Now I tried make, without success:\n\u003e \u003e\u003e\n\u003e \u003e\u003e ----\n\u003e \u003e\u003e .....\n\u003e \u003e\u003e Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const\u0026)]+0xf): undefined reference to `BN_init'\n\u003e \u003e\u003e Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const\u0026)]+0x1e): undefined reference to `BN_copy'\n\u003e \u003e\u003e Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const\u0026)]+0x38): undefined reference to `BN_set_negative'\n\u003e \u003e\u003e Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const\u0026)]+0x4f): undefined reference to `BN_clear_free'\n\u003e \u003e\u003e Script.cpp:(.text._ZngRK7CBigNum[operator-(CBigNum const\u0026)]+0xd3): undefined reference to `BN_clear_free'\n\u003e \u003e\u003e ../../lib/libcoin.a(Script.o): In function `operator\u003c\u003c(CBigNum const\u0026, unsigned int)':\n\u003e \u003e\u003e Script.cpp:(.text._ZlsRK7CBigNumj[operator\u003c\u003c(CBigNum const\u0026, unsigned int)]+0x16): undefined reference to `BN_init'\n\u003e \u003e\u003e Script.cpp:(.text._ZlsRK7CBigNumj[operator\u003c\u003c(CBigNum const\u0026, unsigned int)]+0x2c): undefined reference to `BN_lshift'\n\u003e \u003e\u003e Script.cpp:(.text._ZlsRK7CBigNumj[operator\u003c\u003c(CBigNum const\u0026, unsigned int)]+0xad): undefined reference to `BN_clear_free'\n\u003e \u003e\u003e ../../lib/libcoin.a(Script.o): In function `operator\u003e\u003e(CBigNum const\u0026, unsigned int)':\n\u003e \u003e\u003e Script.cpp:(.text._ZrsRK7CBigNumj[operator\u003e\u003e(CBigNum const\u0026, unsigned int)]+0xf): undefined reference to `BN_init'\n\u003e \u003e\u003e Script.cpp:(.text._ZrsRK7CBigNumj[operator\u003e\u003e(CBigNum const\u0026, unsigned int)]+0x1e): undefined reference to `BN_copy'\n\u003e \u003e\u003e Script.cpp:(.text._ZrsRK7CBigNumj[operator\u003e\u003e(CBigNum const\u0026, unsigned int)]+0x47): undefined reference to `BN_clear_free'\n\u003e \u003e\u003e Script.cpp:(.text._ZrsRK7CBigNumj[operator\u003e\u003e(CBigNum const\u0026, unsigned int)]+0xcb): undefined reference to `BN_clear_free'\n\u003e \u003e\u003e ../../lib/libcoin.a(Script.o): In function `operator!=(CBigNum const\u0026, CBigNum const\u0026)':\n\u003e \u003e\u003e Script.cpp:(.text._ZneRK7CBigNumS1_[operator!=(CBigNum const\u0026, CBigNum const\u0026)]+0x14): undefined reference to `BN_cmp'\n\u003e \u003e\u003e ../../lib/libcoin.a(Script.o): In function `operator\u003e(CBigNum const\u0026, CBigNum const\u0026)':\n\u003e \u003e\u003e Script.cpp:(.text._ZgtRK7CBigNumS1_[operator\u003e(CBigNum const\u0026, CBigNum const\u0026)]+0x14): undefined reference to `BN_cmp'\n\u003e \u003e\u003e ../../lib/libcoin.a(Script.o): In function `uint256 Hash\u003c__gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e \u003e(__gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e, __gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e)':\n\u003e \u003e\u003e Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256 Hash\u003c__gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e \u003e(__gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e, __gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e)]+0x6d): undefined reference to `SHA256'\n\u003e \u003e\u003e Script.cpp:(.text._Z4HashIN9__gnu_cxx17__normal_iteratorIPhSt6vectorIhSaIhEEEEE7uint256T_S8_[uint256 Hash\u003c__gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e \u003e(__gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e, __gnu_cxx::__normal_iterator\u003cunsigned char*, std::vector\u003cunsigned char, std::allocator\u003cunsigned char\u003e \u003e \u003e)]+0xb8): undefined reference to `SHA256'\n\u003e \u003e\u003e collect2: ld returned 1 exit status\n\u003e \u003e\u003e make[2]: *** [bin/bitcoind] Error 1\n\u003e \u003e\u003e make[1]: *** [applications/bitcoind/CMakeFiles/app_bitcoind.dir/all] Error 2\n\u003e \u003e\u003e make: *** [all] Error 2\n\u003e \u003e\u003e -----\n\u003e \u003e\u003e\n\u003e \u003e\u003e What can I do?!\n\u003e \u003e\u003e\n\u003e \u003e\u003e Best,\n\u003e \u003e\u003e Thiago\n\u003e \u003e\u003e\n\u003e \u003e\u003e\n\u003e \u003e\u003e On 1 February 2012 12:18, Michael Grønager \u003cgronager at ceptacle.com\u003e wrote:\n\u003e \u003e\u003e Dear Bitcoiners,\n\u003e \u003e\u003e\n\u003e \u003e\u003e libcoin is now in a state ready for its first release, which I would like to share with you!\n\u003e \u003e\u003e\n\u003e \u003e\u003e === libcoin is a crypto currency library based on the bitcoin/bitcoin \"Satoshi\" client. ===\n\u003e \u003e\u003e\n\u003e \u003e\u003e Copenhagen, Denmark - 1st February 2012 Ceptacle announces the release of the first version of the crypto currency library \"libcoin\" based on the bitcoin/bitcoin \"Satoshi\" client.\n\u003e \u003e\u003e\n\u003e \u003e\u003e libcoin also maintains a version of bitcoind that is a 100% compatible drop-in replacement of the bitcoin/bitcoind client: You can use it on the same computer on the same files and you can call it with the same scripts. And you can easily extend it without touching the basic bitcoin source files.\n\u003e \u003e\u003e\n\u003e \u003e\u003e The libcoin/bitcoind client downloads the entire block chain 3.5 times faster than the bitcoin/bitcoind client. This is less than 90 minutes on a modern laptop!\n\u003e \u003e\u003e\n\u003e \u003e\u003e In libcoin, the Satoshi client code has been completely refactored, properly encapsulating classes, removing all globals, moving from threads and mutexes to a pure asynchronous approach. Functionalities have been divided into logical units and libraries, minimizing dependencies for e.g. thin clients.\n\u003e \u003e\u003e\n\u003e \u003e\u003e libcoin is chain agnostic, all chain (bitcoin, testnet, namecoin, litecoin, ...) specific settings are maintained from a single class (Chain) and hence experiments with chain settings, mining, security and digital currencies for research and educational purposes are easily accessible. See the ponzicoin example for how you define your own chain.\n\u003e \u003e\u003e\n\u003e \u003e\u003e The build system of libcoin is based on CMake and supports builds of static and dynamic libraries on Linux, Mac OS X, and Windows.\n\u003e \u003e\u003e\n\u003e \u003e\u003e The libcoin license is LGPL v. 3. This mean that you can use it in open source as well as in commercial projects, but improvements should go back into the libcoin library.\n\u003e \u003e\u003e\n\u003e \u003e\u003e ======\n\u003e \u003e\u003e\n\u003e \u003e\u003e Read more on libcoin on: http://github.com/ceptacle/libcoin/wiki\n\u003e \u003e\u003e\n\u003e \u003e\u003e Join libcoin on twitter: http://twitter.com/libcoin\n\u003e \u003e\u003e\n\u003e \u003e\u003e Download \"libcoin Satoshi release\": http://github.com/ceptacle/libcoin/zipball/v0.4.0.1\n\u003e \u003e\u003e\n\u003e \u003e\u003e Best regards,\n\u003e \u003e\u003e\n\u003e \u003e\u003e Michael Gronager, PhD\n\u003e \u003e\u003e Director, Ceptacle\n\u003e \u003e\u003e Jens Juels Gade 33\n\u003e \u003e\u003e 2100 Copenhagen E\n\u003e \u003e\u003e Mobile: +45 31 45 14 01\n\u003e \u003e\u003e E-mail: gronager at ceptacle.com\n\u003e \u003e\u003e Web: http://www.ceptacle.com/\n\u003e \u003e\u003e\n\u003e \u003e\u003e\n\u003e \u003e\u003e ------------------------------------------------------------------------------\n\u003e \u003e\u003e Keep Your Developer Skills Current with LearnDevNow!\n\u003e \u003e\u003e The most comprehensive online learning library for Microsoft developers\n\u003e \u003e\u003e is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,\n\u003e \u003e\u003e Metro Style Apps, more. Free future releases when you subscribe now!\n\u003e \u003e\u003e http://p.sf.net/sfu/learndevnow-d2d\n\u003e \u003e\u003e _______________________________________________\n\u003e \u003e\u003e Bitcoin-development mailing list\n\u003e \u003e\u003e Bitcoin-development at lists.sourceforge.net\n\u003e \u003e\u003e https://lists.sourceforge.net/lists/listinfo/bitcoin-development\n\u003e \u003e\u003e\n\u003e \u003e\n\u003e \u003e Michael Gronager, PhD\n\u003e \u003e Director, Ceptacle\n\u003e \u003e Jens Juels Gade 33\n\u003e \u003e 2100 Copenhagen E\n\u003e \u003e Mobile: +45 31 45 14 01\n\u003e \u003e E-mail: gronager at ceptacle.com\n\u003e \u003e Web: http://www.ceptacle.com/\n\u003e \u003e\n\u003e \u003e\n\u003e \u003e\n\u003e \n\u003e \n\nMichael Gronager, PhD\nDirector, Ceptacle\nJens Juels Gade 33\n2100 Copenhagen E\nMobile: +45 31 45 14 01\nE-mail: gronager at ceptacle.com\nWeb: http://www.ceptacle.com/",
"sig": "552456484673084693885943641880140234901e3642aca05d017dc3e192c3b5b3e1cc5d7f417270481d5339318be6ad97fcaa907ef2226ac393b42e2017830c"
}